CZY22 series DC contactor is a new product newly developed by Dongmu company, with rated current 40A to 80A, with two normally open two normally closed main contacts. CZY22 innovative use of permanent magnet arc extinguishing technology, effectively solve the traditional contactor critical breaking current difficult, breaking limit current transition wear contact.
1、 Purpose
CZY22 series DC contactor is suitable for switching on breaking DC circuit frequently in long distance. Its main control object is DC motor, which is widely used in fire control equipment. It can replace double power supply in high voltage switch control cabinet.
3、 Installation use conditions
1. The altitude should exceed 2000m (special instructions should be given when ordering in high altitude areas);
2. The ambient air temperature is - 25 ℃ ~ + 40 ℃;
3. The inclination angle between the installation surface the vertical plane is less than + 22.5 ° (see Figure). When the field vibration is large, it is recommended to install in the vertical direction of vibration to prevent the mechanism being pulled in by vibration;
4. It is installed in the environment that can prevent rain, snow, wind sand;
5. Screw installation 75mm U-type guide rail installation is adopted.
7、 Ordering instructions
■ the following must be stated when ordering
1. All models names of contactors;
2. Control the voltage of the coil;
3. Order quantity
For example: CZY22-63 / 22-22 DC contactor, AC110V, 10 sets.
It refers to rated current of 63A, main contact 2 normally open 2 normally closed, auxiliary contact 2 open 2 closed, coil voltage AC110V, order 10 sets.
4. Special voltage specifications customers' needs can be ordered specially.